Armor
Shine
Paint-on
Model Gloss
Armor
Shine improves case presentations by providing a protective, high
gloss coating to gypsum models. A single coat prevents dirt and
oils from staining the model and protects against chipping. With
less than one micron in thickness, Armor Shine does not create occlusal
inter-ference. Fast drying and easy to apply, Armor Shine is ideal
for producing diagnostic wax-ups, study, C&B and ortho models
of the highest quality.
|
Smoothex
Debubbling Solution
A
surface tension reducing liquid for treating patterns to permit
better adherence and flow of investment.
Also
excellent for treating synthetic impressions (Polysulfide, Silicone,
or Polyether) before pouring casts.
Refillable,
fine-spray bottles are easy to use and help keep debubblizer clean
by eliminating the need for dipping brushes or patterns.
|
| Item
No. |
Description |
| Armor
Shine Paint-on Model Gloss |
| 09679 |
1
Liter (34 oz.) Bottle |
| 09678 |
100
mL (3.5 oz.) Bottle |
| GYPSUM
HARDENER (Winterized) |
| 09717 |
450
ml (1 pint) Bottle |
| 09725 |
3.75
liter (1 gallon) Container |
| 27774 |
15
liter (4 gallon) Case |
| SMOOTHEX
(Debubblizer And Wax Pattern Cleaner) |
| 29386 |
115
ml (4 oz.) Bottle with Fine Spray Pump |
| 02313 |
225
ml (8 oz.) Bottle with Fine Spray Pump |
| 09849 |
450
ml (1 pint) Bottle |
| 29394 |
1
liter (34 oz.) Bottle |
| 12912 |
3.75
liter (1 gallon) Container |
| FOILCOTE
(Liquid Foil Substitute) |
| 09687 |
100
ml (3-1/2 oz.) Bottle |
| 09709 |
3.75
liter (1 gallon) Container |
| 27782 |
15
liter (4 gallon) Case |
| Item
No. |
Description |
| LUBRITEX
NO. 12 (Die Lubricant) |
| 09784 |
100
ml (3-1/2 oz.) Bottle |
| 09792 |
450
ml (1 pint) Bottle |
| GATOR
DIE LUBE (Die Lubricant) |
| 27111 |
14
ml (1/2 oz.) Bottle with Brush in Cap |
| 27146 |
100
ml (3-1/2 oz.) Bottle |
| 27154 |
225
ml (8 oz.) Bottle |
| GYP-STRIP
(Gypsum Remover) |
| 27014 |
3.75
liter (1 gallon) Container |
| 27022 |
15
liter (4 gallon) Case |
| MODEL
GLOW (Model Soap) |
| 29009 |
3.75
liter (1 gallon) Container |
| 29017 |
15
liter (4 gallon) Case |
|
Gypsum
Hardener (Winterized)
 
Replaces
water as the gauging liquid for mixing with gypsum materials where
increased hardness and reduced brittleness are desired; will also
improve the "running" or flowing quality of the mix. It does not
clinically affect the other properties of the die or model materials
or plasters. This formula is not damaged by freezing.
|
Gator
Die Lube
Provides
a fast-drying uniformly thin release film that prevents wax copings
from adhering to stone or epoxy die. And because it's long lasting,
wax patterns separate easily from the die, even when left overnight
or for longer periods of time.
|
| Foilcote
Liquid Foil Substitute
When
applied to plaster or stone, it seals the pores and forms a smooth
surface that gives excellent separation of the denture from the
mold. Eliminates the time- consuming tinfoiling and resulting creases.
|
Lubritex
No. 12 Die Lubricant
A
water-soluble lubricant that is equally effective on all types of
die materials. LUBRITEX will not react with die or pattern
materials and will not affect investments.
|
| Gyp-Strip
A
highly effective gypsum remover, not only keeps equipment sparkling
clean -- it saves time and energy, too. GYP-STRIP'S penetrating
action removes plaster, stone and gypsum investments from mixing
bowls, acrylic dentures, denture flasks, casting rings and non-aluminum
articulators. GYP-STRIP is versatile -- you can use it in
an ultrasonic, or as an overnight soaking agent. Available in one-gallon
jugs, GYP-STRIP requires no mixing or diluting.
|
Model
Glow Model Soap
MODEL
GLOW gives an incredibly high luster to gypsum models. Its special
formulation does not yellow or flake and seals the pores to provide
a protective coating. Its thin consistency does not affect occlusal
accuracy. Long lasting and can be used full strength or diluted.
Models can be buffed wet or dry.
|
|
|
